This software is compatible with both the orginal and current models of the Cricut Personal and Cricut Expression machines. You may however need to update the firmware on your Cricut machine for the software to function properly

When you turn on your Cricut^TM machine, the display will show which firmware version is currently loaded on your Cricut machine. Sure Cuts A Lot requries version 1.1 for Cricut Personal machines and version 2.1 for Cricut Expression machines.

Right now, the only way to do this is from a Windows machine (XP SP2/Vista) by using ProvoCraft's Cricut Desgn Studio^TM software. They have a free trial version available for download which you can download and use to update the firmware on your Cricut^TM machine.

We have versions available for Windows (2000/XP/Vista) and Macintosh OSX (10.4 and up).

No. Sure Cuts A Lot cannot cut any shapes from your Cricut cartridges

No. Any standard USB cable will work, as long as it is an A/B type cable. An A/B type cable has one flat end and one square end. The A/A type, with two flat ends will not work.

The demo version will cut a few horizontal lines through everything as a DEMO watermark.

If your Cricut machine does not have the correct firmware version, you will need to use Cricut Design Studio to update the firmware on your Cricut machine before " Sure Cuts A Lot" can cut properly. There is a free trial version of Cricut Design Studio available to use to update the firmware on your Cricut machine. Other than that, "Sure Cuts A Lot" does not depend on Cricut Design Studio to work.