3.066 |
- Fixed a problem with reading certain scut3 files
- Fixed incorrect positioning when importing SVG from the Library
- Fixed a problem with loading certain images
- Fixed 3D extrude window
|
3.064 |
- Fixed a problem importing certain SVG files
- Added A3/A4 mat sizes
- Fixed some settings not being saved
|
3.062 |
- Added cut selection only option
- Fixed a problem with importing scut files with multiple pages
- Fixed a problem skewing objects
|
3.061 |
- eShape store access added
- Add custom mat sizes
- Added USCutter TITAN model
- Fixed repeat cut for MyDigiDi
- Blade Offset/Overcut moved to Cutter Settings window
- Fixed multi-cut problem
|
3.055 |
- Fixed timeout problem with BlackCat,Silver Bullet
- Added manual Print+Cut option for Koala
- Fixed Bluetooth speed problem
- Multi layer selection from Layer window
- Improved accurarcy of width and height of shapes
|
3.053 |
- Added baudrate option for USCutter
- Added calibrate option for My DigiDi
- Fixed a problem with autormark registration via Bluetooth for Koala
- Fixed a problem reading certain jpeg files
- Fixed a problem with custom pen sets not saving/loading
|
3.052 |
- Fixed a problem with showing incorrect print margins
- Fixed a problem with certain welds
- Fixed a problem with the mat not updating after changing orientation
- Allow negative numbers for laser calibration
|
3.051 |
- Fixed a problem with Blackout lines cutting incorrectly
- Fixed a problem loading certain jpeg files
- Fixed a problem with contour cutting with USCutter LaserPoint I (Pro version)
|
3.050 |
- Added option for Graphtec CE6000
- Fixed a problem with communicating with eCraft cutter
|
3.049 |
- Fixed a problem with choosing Rhinestone shapes
- Library window can add shortcut/alias folders in My Designs
|
3.048 |
- Added option in the Cut Settings window for some cutter to adjust registration mark size
- Fixed a problem where some images were not printing
- Fixed a problem with the program not loading properly
|
3.046 |
- Fixed a problem with the Library window not opening after closing it
- Fixed a problem with opening some scut3 files
- Fixed a problem with doing a Blackout when doing an image trace
|
3.045 |
- Changed Library Window
- Fixed a problem with GIF not importing from SVG files
- Fixed a problem with Printing some designs
- Fixed a problem with traced images coming in at the wrong size
|
3.044 |
- Added Silhouette Portrait
- Added Roland GX
- Fixed a problem with importing some jpeg files
- Changed eCraft cut settings window to show layout relative to cutter
- Fixed a problem with scanning registration marks with Cougar Pro
|
3.042 |
- Import EPS files
- Fixed a problem with the Cut Settings window for VinylExpress
- Fixed a problem with Printing from the Print+Cut window for Silhouette
- Fixed a problem with communicating with some USCutter models
- Fixed a problem with doing Cut and Draw objects with the eCraft
|
3.040 |
- Added option to add calibration values for Silhouette
- Fixed a problem with some objects not cutting
- Fixed a problem with some objects not printing
|
3.039 |
- Changed order objects are cut
- Added more functionalty for editing nodes & paths
- Fixed communication issues with some Graphtec and VinylExpress models
- Additional various bug fixes
|
3.036 |
- Changed way to specify what cutter(s) you use
- Added Print+Cut 3 point registration for Gazelle
- Fixed a problem with BlackCat and Silver Bullet machines doing Print+Cut or Calibration
- Fixed a problem with cutting with some USCutter machines
- Added support for Inkscape and Adobe Illustrator export plugins
|
3.032 |
- Fixed a problem with incorrect Blade Offset when doing Print+Cut
- Fixed a problem with importing certain raster images from SVG
- Fixed a problem with using keyspan device with BlackCat and USCutter
|
3.031 |
- Added support for Inkscape plugin to send designs from Inkscape to SCAL
- Added support for Adobe Illustrator plugin to send designs from AI to SCAL
Fixed a problem with custom presets not saving for Silver Bullet
- Fixed various problems with handling text
- Fixed a problem with importing certain SVG files
|
3.030 |
- Changed Print+Cut for Silhouette in Cut Settings window
- Added slower speed for moving laser (on supported machines) by holding down Ctrl+Shift on Windows or Cmd+Shift on Mac
- Fixed a problem with certain pattern fills not printing
- Fixed problem with Gazelle cut settings window not opening
- Fixed problem with Scissors button in Print+Cut not starting the cut
|
3.027 |
- Added new cutter "Silver Bullet"
- Added Origin point cutting to start cutting where the blade is positioned
- Added Close Path under Path menu to close open paths
- Shadow Layer has option to inset shadow
- Fixed dash lines saving/importing from SVG files
- Other various bug fixes
|
3.026 |
- Added options in the Print dialog to print registration marks or just outlines
- Fixed problems with doing boolean operations on Lattices
- Added option to specify registration mark sizes in the Preferences
|
3.018 |
- Adjusted margins on Cameo mat
- Registration marks for Silhouette print black
|
3.016 |
|
3.015 |
- Fixed a problem with files not being saved properly
- Fixed a problem with open paths not cutting properly on Pazzles
- Moved multi cut option to the Cut Settings window
|
3.012 |
- Changed margins when using 12x12 mat for Silhouette CAMEO
|
3.011 |
- Added option for Silhouette CAMEO under the Cutter menu
|
3.010 |
- Fixed a problem when using custom cut presets
- Fixed a problem with using the Overcut
|
3.007 |
- Fixed a problem with cutting beyond 12 inches no eCraft
- Fixed a problem with cutting with Silhouette SD
|
3.005 |
- Fixed problems where some cutting machines were not found when cutting
- Added Silhouette registration marks
|
3.001 |
- Added Blade Offset, Overcut settings when cutting
|
3.0 |
|